N1413E, Aeronca Champ 7AC-CONV
N1413E
Manufacture Year: 1946
Serial #: 7AC-4976
Total Time: TTAF 2239 @ 0.0 Tach (Tach "0" at Restoration).
Description: Light Sport, VFR Day/Night, 85HP, Electric start, Radio, XCom, Wheel pants, New Spars, Flight with Door Removed STC, Vortex Generators STC, 1300LB Gross....
Asking Price: $42,500 ~ SOLD 05/11 ~
Overhauled Continental A65-8F "Chrome"
Serial #: 3553158
This beautiful engine goes in your pride and joy.....
Channel chrome cylinders, chromed rocker covers and induction tubes. Cad-plated flange shaft with fresh .010" grind (Lots of overhauls left). All components inspected and reworked by well-known facilities with paperwork to prove it. Many new parts - too many to list here. Engine crankcase sealed per Continental SIL 97-4C and best practices to keep your engine nice and dry for years to come. High-quality flexible seals installed where available. Assembled and inspected by A&P/IA with past experience in overhauling small Continentals. Awaits accessory installation and engine run-in. Don't let this one get away!
Free shipping to Central/Eastern US if you pay asking price
Asking Price: $7,500 ~ SOLD 05/11 ~
Schweizer SGS 2-33A
N2608H
Year: 1976
Serial #: 451
Total Time: Approx. 3280 Description: Two-seat trainer. New fabric, paint & clean interior. New seat cushions. Work done in 2006/2006.
Known Problems: Some trouble with localized paint chipping. Most spots already touched up.
Asking Price: $8,500 ~SOLD 12/07~
(Click link on left window bar for more information.)
Cessna 310B
Year: 1958
Serial #:
Total Time:
Description: Aircraft was originally purchased as a project airplane after the right gear collapsed while taxiing on the ground. It was flown to X58 where repairs were started. Both propellers ended up being no good, and the engines were later sold when the owner came on hard times. The aircraft eventually came into our possession and is now parked outside waiting for a buyer. Repairs need to be finished on the right wing tip. In addition, inboard flaps and nose gear doors are missing. Everything else is there. The instrument panal has been replaced with a new blank panal. A few holes have already been cut but the rest have only been marked. This will need some work, but that is why the price is so low.
Asking Price: $3,800 ~SOLD 11/07~